Quark-elec QK-A015-TX Active VHF Splitter (for AIS transponders)

This active AIS-VHF Antenna Splitter provides a typical AIS Gain of 12dB, while allowing one VHF antenna to be shared between,

1. VHF radio
2. AIS transponder and
3. AM/FM radio 

Specifically, the A015-TX  allows the one VHF antenna to provide the following functions:

• Reception of VHF radio, AIS messages and AM/FM radio
• Transmission from VHF radio
• Transmission of AIS messaging from your AIS transponder
• Straight forward connection to the relevant devices

The A015-TX is an active splitter.

This is an important distinction, as, while many splitters cause signal loss, an active splitter actually provides a signal gain for AIS and minimises VHF and FM/AM insert loss. The A015-TX’s built-in pre-amplifier amplifies the AIS signals, thereby increasing the AIS receiver range and reception.

The A015-TX has five connections:
• Power cable: connect to 12V-24V DC power
• VHF Antenna: SO239 connector for VHF antenna
• VHF Radio: SO239 connector for VHF radio
• AIS: SO239 connector for AIS transponder
• FM/AM: BNC connector for FM/AM radio signal output

Features

• 12V-24V powered
• Low power consumption
• Uses standard SO239 connector for VHF, AIS and antenna connections
• Typical AIS gain 12dB
• Less insert loss (≤ 3.0dB) for VHF radio and FM/AM radio(≤ 0.5 dB)
• Built-in pre-amplifier (typical Gain 12dB) providing AIS signal gain and maximises receivers’ range
• LED power and status indicator
• Compact & easy to install
• VHF failsafe function – in the unlikely case of splitter power loss or failure, the VHF radio remains functional, as VHF radio has full priority.

Fully compatible with all AIS transponders and will maximise their performance.

Please note: The A015-TX is compatible with AIS transponders/transceivers. While it can also be used with AIS receivers, if you require an AIS ‘receive only’ splitter the A015-RX is sufficient.

What’s included?

• 1 x QK-A015-TX
• 1 x printed setup guide

Help and Support

For any technical questions regarding this product, you can visit the forum at https://www.quark-elec.com/forum/ and ask your question, it’s regularly checked by the Quark technical team and your question may already have been answered there.

Alternatively, contact us directly, with details of your set up and we will be happy to help.